10
O P E R A T I N G I NS T R U C T I O N S
Unit Control Panel
Room Temp
/Set Temp
/Set Timer display
Fan speed operation display
Indic a tor s
Auto operation display
Cooling operation display
Dry operation display
Heating operation display
Fan operation display
Vertical airflow display (optional)
Horizontal airflow display
Sleep operation display
Turbo operation display (optional)
Off timer operation display
On timer operation display
Lock operation display
Operation buttons
1
ON/OFF button
: Operation starts when this button is pressed and stops when you press the
button again.
2
MODE button
: Press this button to select the appropriate operating mode. Each time the button
is pressed, the operation mode is shifted in the direction of the arrow:
AUTO COOL DRY
HEAT
(for cooling & heating models only)
FAN ONLY
Mode indicators illuminate under the different mode settings.
Auto:
Automatically choose the operation mode by sensing the difference between the
actual ambient room temperature and the set temperature on the remote controller. The fan
speed is automatically controlled.
Cool:
Enables you to enjoy the cooling effect at you preferred setting temperature
(Temperature range: 17ºC~30ºC).
Dry:
Enables you to set the desired temperature at low fan speed which provides you with
the dehumidifying surroundings (Temperature range: 17ºC~30ºC). In Dry mode, you cannot
select Fan speed and Sleep mode.
Heat:
Permits heating operation (For cooling & heating models only)
(Temperature setting range: 17ºC~30ºC)
Fan only:
Permits fan operation without cooling or heating. In this case, however, the setting
temperature is not displayed and you cannot adjust the set temperature.
