Kaysun KID-01, Owner'S Manual, Page: 6 / 16

4
Functions Bottons
(continued)
Note:
KID-01 S model have on FOLLOW
ME button.
NOTE: While the unit is running under SLEEP mode, it would be can-
celled if ON/OFF, FAN SPEED, SLEEP or MODE button is pressed.
10 TIMER OFF Button
Press this button to activate the Auto-off time setting. Each press will
increase the time setting in 30 minutes increments, up to 10 hours,
then at 1 hour increments up to 24 hours. To cancel the Auto-off time
setting, just press the button until the time setting is 0.0.
11 LOCK Button
Press this recessed button to lock all current
settings, and the remote controller will not accept any operation
except that of the LOCK. Use the LOCK mode when you want to
prevent settings from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock symbol will appear
on the remote controller display when the lock function is activated.
12 LED Display Button
Press this button to clear the display on the
indoor unit, press it again to light the display .
13 FOLLOW ME/TEMP SENSING Button
Press this button to initiate FOLLOW ME function. When the Follow
Me function is activated, the remote display is actual temperature at
its location. The remote control will send this signal to the air conditio-
ner every 3 minutes interval until press
the Follow Me button again.
The Follow Me function is not available under DRY and FAN mode.
Switch the operation mode or turn off the unit will cancel the follow
me function automatically.
14 ION Button
When push this button, the ion generator is energized and will help to
remove pollen and impurities from the air.