3.2 Accessories avaliable from supplier
3 ACCESSORIES
3.1 Accessories supplied with the unit
The position of barycenter for different units can be seen in the picture below.
The hook and
barycenter of the
unit should be on
a line in vertical
direction to
prevent improper
inclination
To avoid injury, do not touch the air inlet or aluminum fins
of the unit.
Do not use the grips in the fan grills to avoid damage.
The unit is top heavy! Prevent the unit from falling due to
improper inclination during handling.
CAUTION
B
A
(unit:mm)
Before installation
Be sure to confirm the model name and the serial number
of the unit.
Transport
Due to relatively large dimensions and heavy weight, the
unit should only be hoised by lifting tools with slings, please
refer to the following picture.
4 BEFORE INSTALLATION
C
A
Model
A
A
1 phase 5/7/9kW
B
C
1 phase 12/14/16kW
3 phase 12/14/16kW
350
355
285
540
390
255
500
400
275
Installation and owner’s
manual(this book)
Quantity
Technical data manual
Y-shape filter
Shape
Name
1
1
1
Installation Fittings
Wired controller
1
Drian hose
1
Energy label
1
Network matching
wires
1
Thermistor for buffer tank temp.(Tbt)
Connection wiring of Tbt sensor
Thermistor for Zone 2 flow temp.(Tw2)
06
Maximum length of communication wirings between the unit and the controller is 50m.
Power cords and communication wiring must be laid out separately, they can not be placed in the same conduit.
Otherwise, it may lead to electromagnetic interference. Power cords and communication wirings should not come
in contact with the refrigerant pipe so as to prevent the high temperature pipe from damaging wirings.
Communication wirings must use shielded lines.Including indoor unit to outdoor unit PQE line ,indoor unit to controller
HA and HB line.
1
Thermistor for Tbt,Tw2 can be shared. If necessary, you can
purchase other thermistors and connection wiring from the
supplier.
Protect Angle
Foam
Protect Angle
Protect Angle