Closing curtains during heating also helps
keep the heat in
Doors and windows should be kept closed
Page 7
Features
• Default Setting
When the air conditioner restarts after a power failure,
it will default to the factory settings (AUTO mode,
AUTO fan, 24ºC (76ºF)). This may cause inconsistencies
on the remote control and unit panel. Use your remote
control to update the status.
• Auto-Restart
(some models)
In case of power failure, the system will immediately
stop. When power returns, the Operation light on the
indoor unit will flash. To restart the unit, press the
ON/
OFF
button on the remote control. If the system has
an auto restart function, the unit will restart using the
same settings.
Energy Saving Tips
• DO NOT
set the unit to excessive temperature levels.
• While cooling, close the curtains to avoid direct sunlight.
• Doors and windows should be kept closed to keep cool or warm air in the room.
• DO NOT
place objects near the air inlet and outlet of the unit. This will reduce the efficiency of the unit.
• Set a timer and use the built-in SLEEP/ECONOMY mode if applicable.
• If you don't plan to use the unit for a long time, remove the batteries from the remote control.
• Clean the air filter every two weeks. A dirty filter can reduce cooling or heating efficiency.
• Adjust louvers properly and avoid direct airflow.
• Louver Angle Memory Function
(optional)
Some models are designed with a louver angle memory
function. When the unit restarts after a power failure, the
angle of the horizontal louvers will automatically return
to the previous position. The angle of the horizontal
louver should not be set too small as condensation may
form and drip into the machine. To reset the louver,
press the manual button, which will reset the horizontal
louver settings.
• Refrigerant Leak Detection System
(some
models)
In the event of a refrigerant leak, the LCD screen will
display "EC" and the LED indicator light will flash.
