7
3. Fasten the back plate of wire controller
For exposed mounting, fasten the back plate on the wall with the 3 screws
(M4x20). (Fig. 3-3)
NOTICE
Put on a flat surface. Be careful not to distort the back plate the wire controller, over
tightening mounting screws.
4. Battery installation
• Put the battery into the pcb board of wired controller and make sure of
polarity of the battery. The positive (+) of battery with positive (+) of the
installation place. (See Fig. 3- 5)
• Please, set correct time the first time that you operate with controller.
The battery in the wire controller maintains the memory under power
failure, this mean that wired control not loses the time on the clock
neither weekly timer. When the power restored, if the time displayed is
not correct, it means the battery is empty and need to be replaced.