Kaysun combo type KHP 15/190 ACS1 Manual MCAC-RTSM-2017-09
18
Electric connection
²
If the power supply is not earthed well, the unit should be not installed.
²
The reliable earthing connection and the installation of the unit should be done by a
qualified person.
²
The power supply should be an independent circuit with rated voltage.
²
An all-pole disconnection device which has at least 3mm separation distance in all pole and
a residual current device (RCD) with the rating of above 10mA shall be incorporated in the
fixed wiring according to the national rule.
²
Set the electric leakage protector according to the relevant electric technical standards of
the local.
²
The power cord and the signal cord shall be laid out neatly and properly without mutual
interference or contacting the connection pipe or valve.
²
After wire connection, check it again and make sure the correctness before power on.
Filter
inlet
oulet