Kayoba 951-145, Operating Instructions Manual

Page: 42 / 47

ENGLISH
42
Step 3
1. Place the oval end caps 40 x 80 mm (75) and 30 x 60 mm (43) on both ends of the top bar (10).
2. Attach top cross beam (10) onto the vertical beam (04) use with bolts (52) washer (70) and nuts
(65), from top side and connect the guide rods (02) to the top cross beam (10) with bolt (56)
washer (70) as shown.
3. Fit the rubber damper (42) on the vertical bar (04).
4. Fit the block (19) for the pulley on the vertical bar (04) with the bolts (57), washers (71) and nuts
(66).