EN
69
SAFETY INSTRUCTIONS
Read the operating instructions carefully before use.
Save them for future reference.
WARNING: A bike is exposed to wear, like all mechanical equipment, when you use it. Different
materials and components react in different ways to wear and stress. If the lifespan of any part of
the bike (including the frame, forks and components) has been exceeded there is a risk of the part
suddenly breaking, and that you lose control and fall off. Cracks, scratching or changes in colour
in areas exposed to high levels of stress indicate that the component has reached the end of its
useful life and should be replaced.
• The electric bike is a vehicle – always follow local traffic regulations. Passengers must not be
allowed to ride on the electric bike. Reduce your speed and increase the distance to other road
users in rain, snow or slippery conditions.
• You should not attempt to dismantle parts from the bike for maintenance. Contact a qualified
service technician.
• Do not ride through pools of water or other accumulations of water. Water can penetrate into
the hub motor and cause short-circuiting and irreparable damage.
• The two metal connector plates on the back of the battery box are the battery’s positive and
negative terminals. Do not touch the battery terminals, especially with wet hands. Make sure
that metal objects do not come into contact with the battery terminals as this can cause
short-circuiting and result in electric shock, severe burn injuries and damage to the battery.
• Never allow persons who are not familiar with electric bikes, or who have not read these
instructions, to use this product.
• Do not make any modifications to the product.
Check before use that:
• The tyres are in good condition and have the correct tyre pressure (3.4–5.1 bar).
• The battery is charged.
• The stem, handlebars and saddle post are correctly fitted and tightened.
• The axle nuts are correctly tightened.
• The bell is working.
• The rims are in good condition and undamaged. A worn rim is a safety risk and should be replaced.
• Screw unions and components are properly tightened and not worn or damaged.
• The seat is comfortably adjusted.
• The brakes work properly.
• The steering does not jam, or has too much play.
Operating instructions for
electric bike
ENGLISH
Summary of Contents for 630-102
Page 4: ......
