20
Note!
after 3 seconds E1 will show on the display, continue
to hold the button pushed until E5 is shown in the display.
3
Push the UP or DOWN button to select the
temperature unit Celsius or Farenheit.
Note!
The factory setting is set on unit Celsius.
3.2.3 Battery protection mode
1
When the product is ON, push the settings button
and hold for 3 seconds untill the screen flashes.
2
Push the settings button again to select protection
mode: H (High), M (Medium), L (Low). Refer to the
table below for the voltage reference.
Note!
The factory settings is set to H.
3.2.4 Voltage reference
Mode
DC 12V
DC 24V
OUT (V)
IN (V)
OUT (V)
IN (V)
L
8.5
10.9
21.3
22.7
M
10.1
11.4
22.3
23.7
H
11.1
12.4
24.3
25.7
Note!
The Voltage is a theorical value, there may be a devia-
tion in different situations.
●
H mode: To be set if the product is connected to a car
power.
●
M or L: To be set if the product is connected to a portable
battery or other back up battery.
3.3 To reset the settings
1
Stop the product.
2
Push and hold the settings button until E1 is shown in
the display.
3
While on the E1 setting; Push the UP and Down
button at the same time until the display shows “888”.
3.4 To defrost the product
Caution!
Do not use sharp or pointed tools to remove
ice or items that have been frozen in place.
Humidity can form frost inside the product or on the
evaporator. This reduces the cooling capacity of the product.
1
Turn off and disconnect the product
2
Remove all items stored in the product.
3
Keep the lid open.
4
Remove the defrosted water and wipe it dry.
4 Maintenance
Warning!
Always disconnect the product before you
do any maintenance on it.
Warning!
Repairs must only be carried out by an
authorized service center.
4.1 To clean the product
●
Clean the product after each use.
●
Clean the inside and outside the product with a damp
cloth and a solution of water and vinegar.
5 Storage
●
Clean the product before you store it.
●
Store the product in a dry and frost-free place protected
from direct sunlight.
●
Store the product with the lid open to avoid mold.
6 Disposal
6.1 To discard the product
●
Make sure that you follow local regulations when you
discard the product. Do not burn the product
7 Technical data
Specification
Value
Rated voltage (DC)
12/24 V
Rated Voltage for AC (adaptor)
100V—240V 50–60 HZ
Rated Current for AC (adaptor)
1.2 A — 0.5 A
Rated power
60 W
Temperature range
-20~20°C
Volume
40 L
Noise level
≤ 46 dB
Dimensions (WxDxH)
695x350x460 mm
Weight
13.3 kg