ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.us
- 62 -
Ratchet unit damaged
Replace the ratchet unit
Stiter position spring loose or
broken
Replace the stiter position spring
Gear jump
Fork worn
Replace the fork
Tooth worn
Check gears and replace if necessary
Gear worn
Replace the gear
Shift drum damaged
Replace the shift drum
Fork shaft worn
Check the fork shaft and replace if necessary
Speed selector position spring
damaged
Replace it
clutch slip
clutch disc worn
Replace it
Too soft or damaged clutch
disc spring
Replace it
The clutch is too small
Adjust the free travel of clutch
Motorcycle hard to
turn
Cables make turning difficult
Moving cables to reduce interference
Steering shaft nut too tight
Adjust steering shaft nut
steering bearings worn or
damaged
Check steering bearings and replace if necessary
Steering shaft bending
Contact KAYO Service Centre
Damping too hard
The front fork level is too high
Lower forward fork level to appropriate position
High viscosity of fork oil
Replace the front fork oil with suitable viscosity
Front fork bent
Contact KAYO Service Centre
Too much tire pressure
Check tire pressure and adjust to appropriate pressure
Summary of Contents for T4
