KAYO MOTOR FOX 70, Service Manual

Page: 21 / 105

ZHEJIANG KAYO MOTOR CO., LTD.
WWW.RIDEKAYO.COM
21
Disassembly
1. Remove the bolts 1 and 2.
2.
Push down and gently pull the hood
forward to remove. (Be careful as the
tabs are easy to break)
Installation
In reverse order of disassembly. Locate
tabs into slots and push to lock into
place then install bolts 1 and 2
(note:replace hood plastic if any of the
tabs broke during disassembly)
2.3.2
Handlebar
Disassembly
1.
Cut off power first. (disconnect
battery)
2. Cut plastic ties first, then pluck
functional switch, stop switch and brake
cable plug in sequence.
3. Loose the fixed bolt from brake bar
by tool and remove rear brake bar.
4. Remove front brake bar as the same
as rear brake bar.
5. Pull the damper cable as picture
shows, then remove it.
6. Remove the bolt from accelerator cap
to remove the throttle cable.
7.
Dismounting fixed bolt, then the
lower raiser, remove handlebar at last.
1/2