14. Use tools
①③⑤⑨
to remove the flange
shaft fixed to the front shock and the iron wire
fixed to the rear wheel.
15. Put the vehicle on the stand for easy
installation of other accessories.
16. Use tool
①③⑤
to install the front wheel
(bushings are long on the left and short on the
right, flange shaft enters from the left). (torque
requirement 70-80 N.m)
17. Turn the fuel tank petcock to the position
shown as above.
18. Install the fuel tank cap with vent valve (B)
together, then fill in fuel and tighten the tank
cap.
Summary of Contents for KMB60
Page 1: ...KAYO MOTO KMB60 Assembly Manual WWW KAYOMOTO COM...
Page 2: ......
