15.Please refer to user’s manual (A) for air
pressure requirements. Use compressed air to
inflate the tires, and use the air pressure gauge
(H) to inflate to the standard value of 5psi.
16.Install the front wheel on the front hub, use tool
①③⑬
to tighten the nut(E).
Note: Torque requirement 49-59N.m
17.Align the rear wheel with the splines and
push on the rear axle, with the air nozzle cap
facing outward. Use tool
①②⑬
to lock the nut
and washer, then insert the cotter pin(D), keep
the bending angle greater than 180°
Note: Torque requirement 77-92N.m
18.Insert the dust cover(B) into the positions
shown above.
19.Pull the latch as above shown and remove
the seat cushion, waiting for the subsequent
installation of the battery.
20.Take out the battery, according to the user’s
manual (A), first tear off the seal on the battery,
add electrolyte, then install the battery cover and
wait for the subsequent installation into the battery
box.
