20. As shown in the picture, install the front
wheel on the front hub, and use the tool
④
(No.
14# gun head)
①
(torque wrench)
②
Additional
rod for electric wrench socket to tighten L (self-
locking nut M10*
②
5) and fix screw (torque
requirement 49-59N.m)
21.Align the rear wheel with the splines and push
on the rear axle, with the air nozzle cap facing
outward, install the slotted nut, dust cap washer
and spring washer(O), and use tools
①②⑤
to
lock them. Then insert the cotter pin(O), the
bending angle is greater than 180° (torque
requirement is 77-92N.m)
22. Insert the rubber dust cover (G) into the
position shown above of the front and rear
wheels.
23. Take out rearview mirror from accessory box
and install it on mirror stand, use tool
①
to tighten
screws .
