7.
Use tool
①②⑦
to tighten the rear shock
absorber bolt & nut(O).
Note: Torque requirement 49-59N.m
8. Use tool
⑧⑨
to remove the fixing bolts of the
iron frame and the rear axle.
9. Use tool
⑩
to tighten the nuts and washers
(M) for rear reflector(D) and taillight.
10.Use tool
①④⑫
to install the bracket(J) and
tighten the bolts(P) first, then install the right/left
reflectors.
Note: Torque requirement 25-30N.m
11.Put the vehicle on the stand for easy
installation of other accessories.
12.Use tool
①②⑦⑫
to tighten the bolts and
nuts(O) for front right/left shock absorber.
Note: Torque requirement 49-59N.m
