![background image](http://html1.mh-extra.com/html/kayo-moto/a200/a200_assembly-manual_3703130004.webp)
7.Use tool
⑧
to tighten the bolts and nuts(I).
8.Use tool
⑧
to install the multifunctional switch as
above.
9.Use tool
⑪⑫
to remove the bolts that fix the
rear wheel axle and the packing frame.
10.Put the vehicle on the stand for easy installation
of other accessories.
11.Use tool
①②⑥⑬
to tighten the bolts and
nuts for the front shock absorber(G)(torque
requirement is 49-59N.m).
12.Use tool
①⑤
to tighten the bolts for the Front
bumper(H)(torque requirement is 25-30N.m).