22. Pull the latch as above shown and remove the
seat cushion, waiting for the subsequent installation
of the battery.
23. Use tool
⑩⑬
to remove the battery holder,
install the battery and fix the battery holder,
connect the positive and negative poles as
shown in the picture, use tool
⑦
to tighten the
screws, then install the seat. (Red is positive,
black is negative)
24. Use tools
⑦⑩
to tighten the front plastics
screw, washer and nut(Q)
25. Take out rear L&R reflector bracket(C)
from the accessory box and use tool
①⑤⑨
to
tighten the screws(T) of the reflector bracket
and install the reflector. (torque requirement
25-30N.m)
26. Unscrew the fuel tank cap, add gasoline, and
tighten the fuel tank cap clockwise.
27. Please read the user’s manual (D) carefully
before riding to better understand the
performance of the vehicle.