PHONE:
NZ +64 4 473 4989
AU Toll Free 1800 231 153
USA Toll Free 1855 387 5440
EMAIL:
www.kaynemaile.com
03
Kaynemaile
®
Installation Guide :
Hanging Screens
Prepare Tube (section 3 continued)
3.
The ring retainer must be removed from the
tube end before the tube can be inserted
through the mesh.
1.
Insert tube into top row of rings. As the
tube is inserted ensure the ring spacing
and ring alignment is consistent across the
hanging tube.
2.
To prevent the tube from snagging rotate
the tube so that the cap head screws are on
the underside.
Install Tube into Mesh
4.
Note ring count per cap screw (Fig 3.2). Take care to ensure
that the hooks do not change the ring spacing count.
Fig 2.4
Fig 2.5
Fig 2.6
Fig 3.1
Fig 3.2
1.
Once the tube has been correctly installed
through the mesh reattach the end ring
retainers and clip to the last mesh ring.
2.
Refer to Fig. 3.2 and 3.3 and ensure
the rings are evenly spaced across the
hanging tube.
Mesh Ring Spacing
5.
Fig 3.3
LH
RING RETAINER
TUBE
CAP SCREW
RING RETAINER
TOP
Note: Hooks shown for information only.
Not installed at this point.
