Kayline 442-210, Installation Instructions Manual

Page: 5 / 7

Pg 5 442-210
Rolling Up Side Panels.
It is possible to roll up your side panels and rear curtain to provide more ventilation in your
vehicle. Prior to rolling up side panels or rear curtain you must first make sure that windows are clean. If not properly
cleaned, dirt will scratch them reducing the life of your top. It is also recommended that you use a soft cloth between the
windows and the retaining straps to prevent them from marring the glass. To clean the windows, wash them with a mild
non-detergent soap and water. To roll up side panels first unzip rear curtain and unlock rear bow. Unfasten side panel
from body aluminum, roll up side panel and secure with retaining strap. See figure 6. Lock rear bow and tighten buckle
strap to retain tension on convertible top. Follow same procedure to roll up rear curtain, first removing tailgate retainer.
You may roll up both side panels and rear curtain if you wish.
Step 1.
Unlock rear bow and unfasten sewn in plastic
from body aluminum. Lift side panels and fold on top of
bows.
Step 2.
Remove tailgate retainer. Lift rear curtain and fold
on top of side panels (on top of bows).
Step 3.
Remove horizontal and vertical rods. Fold front of
top to the rear.
Step 4.
As you pull the front of top to the rear of vehicle
fold as you go until you have it neatly folded at the tailgate.
A convertible boot is available from your dealer to enclose
your top preventing it from the dirty while in the down
position. If you intend to leave the top down for an ex-
tended period of time it is recommended that you place a
soft cloth between the widows and vinyl material to prevent
window discoloring.
FOLDING INSTRUCTIONS
Figure 6