INSTALLATION GUIDES
TRACTION PADS
Step 1: Wipe all dust off from area with an alcohol wipe or spray and wipe
Step 2: Ensure the area you are apply is clean and dry
Step 3: Apply traction pad
ADJUSTING THE RUDDER HANDLE
Step 1: Release the rudder into the water
Step 2: Keeping the rudder centred use the knobs on the
side to adjust the rudder cords to remove slack from the rudder cords.
If you have over tighten the rudder cord you can pull the knobs out to release the tension.
MAX DRIVE
Step 1: Lower drive straight down
making sure the spine is level.
Step 2: Press down and lock into
pedel drive locks automatically
when installed.
Installation
Step 1: Pull back each Click and
Go lever.
Step 2: Lift drive straight up.
Removal
Summary of Contents for NEXTGEN 11.5
Page 1: ......
