...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
............................................................
T
E
* Technoarm system is aimed to prevent user from falling. However, the
system itself is not suitable for working at height, it must also be used
together with CE certificated Safety Harness (EN 361, EN 358) energy
absorber lanyard (EN 355), hooks (EN 362) and fall arresters (EN 360)
* Technoarm system must be connected to a fall arrest attachment, which
is marked with “A”, on the back or chest of a full body harness (EN 361)
using an energy absorber lanyard (EN 355), mobile fall arrester (EN 353-2)
or fall arrestor (EN 360).
3- Raw Material
MaterialThis product’s;
* Main Body are made of 6082 T6 Aluminium,
* Anchor Plates are made of 316 Grade Stainless Steel
4- Anchor Point (EN 795:2012 Type A)
This annchor device is suitable for use of maximum 1 users at a time. The
minimum strength of tihs anchor device is 12kN. User weight can not exceed
100Kg including equipments. In case of a fall, the force to the structure
will be in the direction of the fall of the user, the maximum load will be
transmitted in service from the anchor device to the structure according to
directions of loading relevant to the type of fixing and structure is 16.5 kN.
There is no deflection of the anchor device that can occur during service.
Maximum displaecemet of the anchor point that occurs during service is
500mm.
Product Dimensions (Figure-1):
Maximum Height (1300 mm Anchor Post): 2464 mmMinimum Height (600
mm Anchor Post): 1243 m
4.1 Usage
* Connect to TecnoArm only with using to the hooks placed at the
end of rescue device’s line. Do not use more than one as anchor point
simultaneously.
* Do not attach the rope directly to the device.
* Lifting devices must only be used for lifting purposes wtih the leg brackets.
* TecnoArm is only designed for confined space works. Please do not use
the product other than intended use.
* Only the listed equipment is allowed use together with the device
(Figure-2)
* AL-KO 901 WINCH - IKAR HRA-18-24-30 Retractable type fall arresters,
with built in two-way rescue (EN 360, EN 1496)
* HARKEN WINCH
* Device has 2 anchor points but maximum 1 user allowed to attach during
use. (Figure-3)
5. Supplementary information regarding standard; EN 365
5.1 Rescue Plan
While using the product, you must have a rescue plan to be recovered
from a emergency or difficult situation immidiately. Adequately trained
personnel and rescue equipment must be on hand for rescue.
5.2 Anchor Point
The anchor point of the system comprises this product should preferably
be located above the user or should at least located at the waist level of
the user. An attachment point below this level will cause a serious injury or
death. The anchor point must conform to the requirements of the EN 795
standard and the minimum strength of it must be 12 kN.
5.3 Various Situations
A fall arrest harness is the only device allowable for supporting the body
in a fallarrest system.
* In a fall-arrest system, it is essential to check the required clearance
under the user before each use, to avoid any impact with the ground or an
obstacle in case of a fall.
* Make sure that the anchor point is correctly positioned, in order to limit
the risk and the height of a fall.
* When using multiple pieces of equipment together, a dangerous situation
can result if the safety function of one piece of equipment is affected by the
safety function of another piece of equipment.
* Users must be medically fit for activities at height. Warning: inert
suspension in a harness can result in serious injury or death.
* Users must be medically fit for activities at height not to affect the safety
of the equipment user in normal and emergency use.
* The instructions for use for each item of equipment used in conjunction
with this product must be respected.
* The instructions for use must be provided to users of this equipment in
the language of the country in which the product is to be used.
6 Control of product and validation
6.1 Before each use:
Working at height equipment must be inspected before each use and / or
on a regular basis. Findings must be recorded on product control book.
Inspection must be performed based on following control criteria.
* Where the installation is being made must be checked for a deformation,
crack.
* Main body and components must be checked for on any wear or cracks
* System components must be checked if they have been in contact with
any chemicalIf the product has one of the deviations aboveit should be
withdrawn from service immediately. Defects found on the product should
not be repaired; manufacturer must be informed about it and user must
proceed as per manufacturer’s recommendation.
6.2 During each use:
During performing the work at height if the equipment is connected with
another system, make sure that all pieces of equipment in the system are
correctly positioned with respect to each other.
7. Kaya General Information
7.1 Product Life:
* There is no theoretical lifetime of metallic materials. Products must be
documented by at least one time per year to determine if the product is safe
to use. KAYA SAFETY is not responsible for the use of the product that has
no nnual periodic control
* Technoarm system is made of stainless steel and aluminum This material
is highly resistant to atmospheric corrosion. Depending on the area of
the use superficial rust spots can be seen on the product (In a short time
of a period industrial sites; iron powders and chemicals. Areas near sea
water; salt in the air like). These superficial stains can be removed with
an appropriate maintenance program. In all circumstances decision to
continue to use the product can only be made if annual periodic control
has been performed and resulted positive by manufacturer or a competent
person authorized by manufacturer If the product has one of the deviations
below it should be withdrawn from service immediately and should be
destroyed to prevent further usage.
* It has suffered a heavy shock load or has had a load dropped onto it.
* If observed signs of corrosion on the product
* If product was recorded not suitable for use during a control and if you
have any doubt about a fall.
* Changes in standards, legislation and changes related to technical use of
it, and similar cases.
* It have been used to arrest a fall and not used again until confirmed in
writing by a competent person that it is acceptable to do so
7.2 Storage:
Product is sold with its storage bag.Instruction manual for use and applied
standards are written on the product sheet. During the storage keep the
product in it’s own bag.
Storage area of the product should meet following requirements;
* Dry, no direct sun light, room temperature
* Do not store together with acid, solvents etc.
* Keep away from direct heat sources.
* If the product humided during the storage, dry the product in room
temperature before usage.
* keep aware from chemicals such as corrosive and acids.
7.3 Maintenance:
Taking good care of the product after each use extends the life of it. Use
metal cleaners to clean the product. For detailed information please
contact us on [email protected]
7.4 Changes and repair
Changing a part, repair and addition to any component of the system is
strictly forbidden without written authorization of KAYA SAFETY. Any
repairs on products can only be done by manufacturer or qualified persons
authorized by the manufacturer. All repair and maintenance work must
only be performed in accordance with manufacturer’s instructions KAYA
won’t be responsible for repairs performed by for unauthorized persons.
Manufacturer’s instructions for repair and maintenance can be obtained
from authorized distributor in the official language of the country in which
the item is in service. Please contact authorized distributor in your country.
7.5 Transportation of product:
The product should be transported in its special package to keep it away
from moisture, chemicals and sharp edges as well as to protect it getting in
contact with another objects
