...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
............................................................
1.3-
There must be a plan of rescue that is to be applied in case of
emergency which can occur during working.
1.4-
This product is rated for 150kg load capacity and must be used
together with equipment which have the same load capacity.
Warning:
This equipment shall not be used outside its limitations, or for any
purpose other than that for which it is intended.
There are many hazards that may affect the performance of the equipment
and corresponding safety precautions that have to be observed during
equipment utilization, especially: sharp edges, any defects like cutting,
abrasion, corrosion, climatic exposure, pendulum falls, extremes of
temperature, chemical reagents, electrical conductivity.
2. Raw Material
This Miner’s Belt is made of;
Textile Materials: % 100 Polyester
Metal Parts: Aluminum and Steel.
Accessories: Polyester, Polyamide and PVC
3. General Specification
*
Anti-Static Miner’s Belt
*
This Miner’s Belt allows you to work safely by connecting from a safe
point with an auxiliary equipment in mining operations. This Miner’s Belt is
manufactured in comply with standards of EN ISO 80079-36:2016 and EN
1127-2:2014 specified in ATEX Directive 2014/34 (EU).
4. Product Use
4.1- EN 361:2002 Fall Arrest Harness
*
The Anti-static Miner’s Belt is specially designed and manufactured to
carry the Breathing Kit and Head Lamp Battery in work areas at risk of
explosion. Reflective tapes are used to increase visibility and automatic
buckles with indicators are used for easy wearing. In order to connect the
Breathing Kit and the Head Lamp Battery, a special area with 2 leather
straps has been made on the back of the belt. The Max rated for this
Miner’s Belt is. The load is 150 kg.
Warning:
Anti-static Miner’s Belt is not suitable for fall arresting purposes.
The adjustment and the tightness of the buckles and webbings should be
checked regularly during use.
Advice:
User should carry out test in a safe place before using the Miner’s
Belt for the first time, to ensure that it is the correct size, has sufficient
adjustment and is of an acceptable comfort level for the intended use.
5. Product Control and Validation
5.1 Before Every Single Use
Miner’s Belt must be used as personalized. These products must be
controled on regular basis before and after each single use and findings
must be recorded into product control form. On an adequate lighted
environment apply following controls by lying the product down on a flat
surface;
*
Webbings should be checked for cuts, abrasions, color change, broken
stitches and undue stretching.
*
Checking the stitches (the stitches must not be ripped)
*
Buckles should be checked for signs of wear, cracks, deformation,
corrosion or other damages. They should function correctly and smoothly.
*
Metal parts should be checked for signs of wear, cracks, deformation,
corrosion or other damage.
*
Markings should be secure and legible.
*
During the controls if at least one of these deviation is found, usage of
the equipment should be suspended or retired and immediately send back
to producer for detailed inspection. No repair is allowed by unauthorised
person. Only manufacturer directions should be applied.
*
The user should carry out test in a safe place to ensure that the Miner’s
Belt is the correct size, has sufficient adjustment and is of an acceptable
comfort level for the intended use.
5.2 During Each Use
When use product with a system , make sure that all pieces of equipment in
the system are correctly positioned with respect to each other.
6. Rescue Plan
There must be a plan of rescue that is to be applied in case of emergency
which can occur during working. A worker who has been incapacitated
by an injury or medical condition must be rescued immediately. So you
must always have a rescue plan for such emergency situations. For this
adequately trained personnel and rescue equipment must be on hand.
7.Kaya General Information
7.1 Life Span
The potential life time is 5 years from the date of production, it is very difficult
to define the exact service life of it as it varies according to the frequency and
intense of use, environmental conditions, correct maintenance and storage.
Recommended life expectancy of this body harness is 5 years from date of
first use If the product has one of the deviations below it should be withdrawn
from service immediately and should be destroyed to prevent further usage:
*
It has suffered a heavy shock load or has had a load dropped onto it.
*
There are discoloration, stiffness, cuts and tears, glazed or fused areas on
the webbingg.
*
There are cracks, deformation, corrosion or excessive wear on the metal
parts.
*
Labels (markings) are illegible or absent
*
It is extremely dirty and does not respond to normal washing.
*
It has come into contact with chemicals and especially acids or is even
suspected.
*
Its history is unknown.
*
Its life time stated in the user’s manual has expired or even it has never been
used.
*
There is a slightest doubt that the products is no more safety and reliable.
7.2 Storage
Product is sold with storage bag and user guide. Additionally model and
applied standards are provided with the product. During the storage keep the
product in it’s own bag. Storage area of the product should meet following
requirements;
*
Dry, no direct sun light, room temperature
*
Do not store together with acids, solvents etc.
*
Keep away from direct heat sources.
*
If the product gets humidity during the storage, dry the product in room
temperature before usage.Nonconforming conditions may the reduce lifespan
of product.
7.3 Maintenance
Miner’s Belt should be checked regularly to make sure that the equipment
will operate properly whenever it is used Miner’s Belt can be wiped with a wet
sponge, for cleaning. A mild soap and warm water not exceeding 30ºC can
be used for difficult stains. After cleaning, it should be thoroughly rinsed in
clean cold water, hung out in a dry, dark and cool place and kept away from
the direct heat sources. Miner’ Belt should be hung out or placed loosely in a
bag or another container in order to protect it from harmful fumes, corrosive
agent or light (artificial or sunlight). Do not use acidic or solvent chemicals.
7.4 Changes and Repair
Changing a part, repair and addition to any component to product is strictly
forbidden without written authorization of KAYA.
Any repair can be made only by KAYA. Otherwise KAYA is not responsible for
any possible consequences.
7.5 Transportation of Product
The product should be transported in a bag to protect it from humidity,
chemicals and other objects.
7.6 Periodical Inspection of Product
The Safety of user depends upon the continued efficiency and durability of the
equipment, regular periodic examinations are needed. Miner’s Belt must be
inspected by the user before each use and an additional detailed inspec-tion
must be carried out periodically minimum once a year by the manu-facturer
or the person who is authorized by the manufacturer.
During the inspection of product following information should be recorded;
*
Type of the product, trade mark, model, contact information of manufacturer,
serial number,date of production, date of purchase, date of first usage, next
inspection date, problems, recommendations, name, surname and signature
of the inspector.
For further information visit www.kayasafety.com
7.7 Guarantee
This product has 5-year guarantee against all material or manufacturing
defects under proper usage and storage conditions. Guarantee is no more
valid if; product is used wrong, tears, cut, corrosion, unauthorised repair of
changes on the product, damages caused by accidents.
