Gebze OSB 1000 Sk. No: 1015 41480
: + 90 262 677 19 00
F
: + 90 262 677 19 01
KAYASAFETY.COM
...............................................................................................................................
...............................................................................................................................
...............................................................................................................................
............................................................
7. General Information
7.1 Life Time:
Although the potential life time of a KAYA SAFETY ONE LEG
Engery Absorber Lanyard is 10 years from the date of production, it is very
difficult to define the exact service life of it as it varies according to the
frequency and intense of use, environmental conditions, correct
maintenance and storage. Recommended life expectancy of this
Lanyard with energy absorber is 5 years from date of first use.
If the product has one of the deviations below, it should be withdrawn from
service immediately and should be destroyed to prevent further use.
• It has suffered a high shock load or has had a load dropped on to it.
• There is discoloration, stiffness, cuts and tears, glazed or fused areas on
the webbing or ropes.
• There is cracks, deformation, corrosion, excessive wear on the metal
parts.
• It fails to pass inspection (before use or detailed inspection)
• Labels (markings) are illegible or absent
• It is extremely dirty does not respond to normal washing.
• It has come into contact with chemicals and especially acids or is even
suspected.
• Its history is unknown.
• Its life time stated in the user’s manual has expired even it has never
been used.
• There is a slightest doubt that the products is no more safety and reliable.
7.2 Storage:
Product is sold with storage bag and user guide. Additionally model and
applied standards are supplied on the product.
During the storage keep the product it’s own bag. Storage area of the
product should meet following requirements;
- Dry, no direct sun light, room temperature
- Do not store together with acid, solvents etc.
- Keep away from direct heat sources.
- If the product humided during the storage, dry the product in room
temperature before usage
7.3 Maintenance:
Personal protective equipment should be maintained
regularly to help make sure that the equipment will operate properly when
needed. To clean your Lanyard with energy absorber you can wipe with a
wet sponge. For difficult stains you can use a mild soap and warm water
not exceeding 30ºC. After cleaning it should be thoroughly rinsed in clean,
cold water and hung up to dry in a dark, cool place away from direct heat
sources.
Lanyard with energy absorber should be hung up or placed loosely in a bag
or other container to protect it from exposure to harmful fumes, corrosive
agent or light (artificial or sunlight).
Do not use acidic or solvent chemicals!
7.4 Changes and repair:
Changing a part, repair and addition to any
component to product is strictly forbidden withouth written authorisation
of KAYA SAFETY. Any repair to our products can be made only by us (KAYA).
Athorwise KAYA has no responsibility.
7.5 Transportation of product:
The product should be transported in a bag, protecting from humidity,
chemicals and connecting to any solid parts.
7.6 Periodical inspection of product:
Lanyard with energy absorber should be inspected by the user before each
use and an additional detailed inspection must be carried by a competent
person (preferably to producer) other than the user at intervals of no more
than 1 year (12 months).
During the inspection of product following information should be recorded;
Type of the product, model, contact information of producer, serial
number, date of production, date of purchase, date of first use, next
inspection date, problems, recommendations, name and surname of
inspector. For further information visit www.kayasafety.com
7.7 Guarantee:
This product has 3-year guarantee against all material or
manufacturing defects under proper usage and storage conditions.
Guarantee is no more valid if; product is used wrong, tears, cut, corrosion,
unauthorised repair of changes on the product, damages caused by
accidents.
8. Certification:
This product is certified in accordance with 89/686/EEC
directive by TUV-SÜD Product Service (n°0123) Notified Body after tests
according to EN 355:2002.
* KAYA SAFETY has TUV-SÜD Product Service (n°0123) Notified Body
89/686/EEC 11 B Quality System certificate and commit to produce each
product same as tested sample.
Warning:
Read user guide carefully before usage.
NOTE:
ROCK is a trade mark of KAYA Company.
Producer:
KAYA YAPI SAN. VE TİC. A. Ş.
Address:
GOSB. 1000 Sok. No:1015 Çayırova 41480 KOCAELİ / TÜRKİYE
T:
+ 90 262 677 19 00
F:
+ 90 262 677 19 01
E:
W:
www.kayasafety.com
