Camera Link Range Extender over Fiber User Manual
9
4.1
External View of the KY-EXT-CL system
Each
KY-CL2F-D/H (device/host)
unit is housed in a compact, metal enclosure. Each unit has a
power connector, 2 Camera Link connectors (MDR), SFP+ cage, 2 x RJ45 connectors for GPIO and
a Mini USB Terminal interface, as shown in Figure 1.
SFP+
connector
Terminal
interface
CL
connector
Power
connector
CL
connector
GPIO
connectors
Figure 1 : KY-EXT-CL external view
Each of the Camera Link and SFP+ connectors is paired with a status LED and there is a system
status LED (see 4.3 section describing the LED status).
The power connector used in each
KY- CL2F-D/H (device/host)
unit is Tini-QG RA PC 3 pin
(TRA3M SERIES).
Each unit also has mount ears for an easy and secure installation on any flat surface.
4.2
Power supply
This device requires 12V power supply for proper function.
Please, refer to Electrical specification section of this document for exact Power Supply
requirements. The mating connector of the power connector is TA3FX.
4
System Description
