Page no. 15 | Error! Not a valid bookmark self-
reference.
Figure 9 : Removing an SFP+ Module from the port
Figure 10 : SFP+ Module with bale clasp open
6.2
Completing the KY-EXT-CL system installation
In order to properly complete the
KY-EXT-CL
system installation, the following steps must be taken:
1.
Make sure the fiber cable is connected properly, as described in previous section. Please refer to Figure
11 as reference:
Figure 11 : Fiber cable connectivity
2.
Connect the Camera link cables, as shown in Figure 11.
Device Unit
Host Unit
Base
Full
Full
Base
