Page no. 18 | Appendix No. 1
4.
Choose the firmware update option by entering “firmware” followed by a carriage return and wait for the
following message: "Now starting firmware update, please start file transfer using XMODEM:"
Figure 3 – Firmware update execution
5.
Under the “File” tab use the terminal “transfer” capability using the XMODEM protocol to initiate the
firmware update. Choose “Send” and the firmware update file.
Figure 4 – Firmware terminal initiation
6.
If no firmware will be sent during 1 minute, or in case of an error, the firmware update will fail and return
to the previous operation mode.
Figure 5 – Firmware update fail
7.
The firmware update process will take about 10 minutes.
Figure 6 – Firmware update process
