• Do not use this outdoor fireplace on a wooden deck or combustible surface.
• Do not use fireplace near combustible materials or flammable fluids such as gasoline, alcohol, diesel
fuels, kerosene and charcoal lighter fluid.
• This fireplace is only for use on level, hard, non-combustible surfaces.
• This unit has been designed for burning of untreated wood only. Artificial fire logs can be used.
• When burning a fire, keep it small. Do not add wood until the fire has burned down.
Only add wood in small amounts.
• Do not add/place wood on the bottom bowl/pan of the fireplace – only place wood on the log grate.
• Never handle fireplace while in use. Do not touch surfaces as they will be hot.
• Never leave open flame or burning embers unattended.
• Spark screen must be kept in place on fire pit during use to prevent fire.
•
CAUTION:
Fireplace will remain very hot for a long time after it is used. Be sure fireplace has cooled
before moving
.
• Always inspect for signs of damage before use. Do not use until proper repairs have been made.
Only use Kay Home Products service parts.
• Do not allow children to use fireplace. Designate the fireplace area as a “no play” zone. Keep kids
and pets away from hot fireplace.
• Always keep fire suppression tools nearby.
• Protective gloves and long-handled tools are required for use with this fireplace.
• Use care when working near fire, do not stand over fire when lighting or during use, loose clothing
can catch fire easily. If clothing catches fire, always remember to stop, drop and roll.
• Failure to follow all instructions and warnings could result in death, serious injury and/or property
damage.
• Follow all local, state and national codes when using this unit. Contact your local fire department
for information on outdoor burning.
WARNING:
Directions for use
• Check fireplace for any signs of damage or disrepair.
• Place small pieces of wood on log grate and ignite.
• After fire is started larger pieces can be added one at a time.
• After wood is added always replace the spark screen.
• Keep fire reasonable. A large fire can damage or shorten the life of the unit.
• Be sure fire is out before leaving the unit unattended.
Care and Maintenance
• Use care to make sure that ashes are disposed of after each use and only after the unit has completely
cooled.
• Clean only with soap and water and dry completely
• The unit was manufactured with high temperature paint; however, due to the nature of steel, some rusting
can occur. This is not cause for concern. It will not affect the performance of your fireplace.
To extinguish a fire in your fireplace
• Allow the fire to burn completely out. Do not use water to put fire out except in an emergency.
• Do not store the fireplace until it is completely cool.
• Do not store with ashes of combustible materials inside.
2
