Kawaii HG 20S, Instruction Manual

Page: 13 / 16

11
10
Function Button
Description
Position for switching the power supply off Method for cutting off the power supply
NOTE
Figure 1
Figure 2 Figure 3
Function Button
Description
BUTTOCKS
VIBRATION
STRONG
WEAK
Figure 1 Figure 2 Figure 3 Figure 4
Zipper
Strong: LED ON
Weak:LED flashing
Method of Usage Method of Usage
C. Other manual functions
Display
Buttocks
Vibration
Buttocks vibration function
Strong
Weak
Choose from 2 strength levels for the
vibration function: Strong and Weak
Time
Setting
The timer can be set to 15, 20, 25, or 30
minutes.
Display
4.Turn the product off.
During the massage process, press the red power button or let the timer run out to
stop the product. When the controller displays EE , you can press the memory
A or B button to save the current settings. The controller will then display E1
or E2 .
If you do not want to save the current settings, you can press the red power button
again turn the product off, and the product will automatically restore back to its
original position.
NOTE
If the timer runs out and you do not press the memory buttons or the power button,
the product will turn off on its own, but the back rest and calf rest does not
automatically restore back to its original position.
Press the power switch to OFF to cut power from the product.
5. Calf rest extends and moves freely
The calf rest is able to extend and adjust to fit users of different heights. It also moves
freely to massage the foot from any angle.
Calf rest extends Calf rest moves freely
6. Arm Rest Installation
Pull the zipper up from the bottom edge of the arm rest. Connect the air tubes
between the chair frame and the arm rest. Insert the guide post on the arm rest
into the corresponding holes on the chair frame. Avoid bending the air tube and the
guide post (Figure 1).
Fix the arm rest onto the chair frame with two nails. Make sure to check that
nothing is bent before screwing the nails in (Figure 2).
Pull the zipper down. Make sure that the surface is smooth (Figure 3).
Installation is complete. Please do not yank, press, or twist the arm rest with force
when using the product (Figure 4).
1. When attempting to stand up, do not put weight down onto the arm rests to lift
yourself up. Use the edge of the arm rest to push yourself forward (Figure 1).
2. Do not push the top edge of the arm rest inwards (Figure 2).
3. Do not sit on top of the arm rest (Figure 3).
WARNING
WARNING WARNING