2. R: Lo
Reverb is the only effect used. The intensity corresponds to the
preset Lo value. The setting applies to the degree of intensity
determined for the reverb under Lo Depth. For further
information about its assignment please refer to the section
"Reverb Effect Setting".
3. E+R
Reverb and the additional sound effect are used simultaneously.
For further information about the sound effect please refer to the
section "EFX R1/2/L Setting".
4. General Conditions for Sound Effects
The assignment for the zones Right 1 and Right 2 applies to the
set effect, provided Right 1 and Right 2 are selected exclusively
(alternately) or are used in the Split mode. If Right 1 and Right 2
are used in the Layer mode (both LEDs are lit), the assignment
of Right 1 applies to both Right zones.
Hint: In practice this can be used to obtain the following
effect: select a flute sound as the sound program for Right
1 and use the program clean guitar for Right 2. You can also
specify the Layer mode for the Right zones in the section ACC
setting. You can assign distortion to the individual effects. In
the Effect Mixer set Right 1 to Reverb: High, Right 2 to
Reverb. Now you can switch between the two melody
voices of flute (with high reverb content) and distorted guitar. If
you use both Right sounds layered simultaneously, both are
sounded in unison without distortion.
61
Effect Assignment
14
LEFT 2 - RIGHT - 1
