![background image](http://html1.mh-extra.com/html/kawai/mp7se/mp7se_owners-manual_3984448043.webp)
43
ED
IT
M
en
u
EDIT Menu parameters
(INT mode)
16. Vibrate Depth
value
: –64 ~ +63
This parameter adjusts the depth of the vibration applied to the
selected sound.
17. Vibrate Rate
value
: –64 ~ +63
This parameter adjusts the speed of the vibration applied to the
selected sound.
18. Vibrate Delay
value
: –64 ~ +63
This parameter adjusts the delay time before the start of the
vibration.
19. Octave Layer Switch
o
ff
, o
n
This parameter turns the additional Octave Layer ON or OFF.
20. Octave Layer Level
value
: 0 ~ 127
This parameter adjusts the volume level of the Octave Layer.
21. Octave Layer Range
value
: –2 ~ +2
This parameter sets the amount of octave transposition for the
Octave Layer.
22. Octave Layer Detune
value
: –64 ~ +63
This parameter adjusts the tuning of the Octave Layer.
23. Portamento
o
ff
, o
n
This parameter turns portamento playing ON or OFF.
Portamento describes the effect of pitch sliding from one note to another.
24. Portamento Time
value
: 0 ~ 127
This parameter adjusts the time required for the portamento
(i.e. the speed of the ‘slide’ between notes).
25. Portamento Mode
r
ate
, e
qual
This parameter changes the portamento mode.
Portamento Mode Description
Rate
The time required for the portamento will be variable. The distance between notes will affect the portamento time.
Equal
The time required for the portamento will be constant. The distance between notes will not affect the portamento time.
Time
Volume
Key ON
Key OFF
5
6
7
8
About DCA Parameters
The DCA (Digitally Controlled Amplifier) parameters, are used to
adjust the volume level of a sound over time using an envelope.
The diagram below indicates the MP7SE’s DCA parameters.
About DCF Parameters
The DCF (Digitally Controlled Filter) parameters, are used to
adjust a low-pass filter applied to the sound over time.
The diagram below indicates the MP7SE’s DCF parameters.
Time
Fr
equenc
y
Key ON
Key OFF
9
11
12
13
10