Kawai CN201, Owner'S Manual, Page: 10 / 44

10
Preparation
Par
t Names and F
unc
tions
Part Names and Functions
③
④
⑥
⑩
⑦
⑧
⑪
⑨
⑤
⑮
⑫ ⑬ ⑭
①
②
In market locations where Bluetooth
functionality is not available, the
Bluetooth mark will not be printed.
①
[POWER] button
This button is used to turn the power on/off. Be sure to turn
off the instrument after playing.
②
[MASTER VOLUME] slider
This slider controls the volume output from the head-
phones or built-in speakers.
③
Display
It shows the function names and setting values.
A protective plastic film is attached to the display
during production. Please remove this film before
attempting to play the instrument.
④
[1] button
This button is used to select functions shown on [1].
⑤
[2] button
This button is used to select functions shown on [2].
⑥
[REC] button
This button is used to record performances.
⑦
[PLAY/STOP] button
This button is used to play/stop recorded performances
and Internal Songs such as those stored in Lesson.
⑧
[UP] button
This button is used to move the menu up or increase the
setting values.
⑨
[DOWN] button
This button is used to move the menu down or decrease
the setting values.
⑩
[METRONOME] button
This button is used to turn the metronome function on/off
and adjust its tempo, time signature, and volume settings.
⑪
[SOUND SELECT] button
This button is used to select sounds.
⑫
[PEDAL] connector
This connector is used to plug the pedal cable attached to
the pedal unit.
⑬
[USB to HOST] port
This port is used to connect the instrument to a computer
using a USB ‘B to A’ type cable in order to send and receive
MIDI data.
⑭
[DC IN] jack
This jack is used to connect the AC adaptor.
⑮
[PHONES] jacks
These jacks are used to connect stereo headphones to the
instrument, allowing headphones with a stereo mini phone
plug and headphones with a stereo standard plug to be
connected at the same time.