Hardware List
Bill Of Materials
Assembly Steps
BOLT(FH-11)M6X32
QTY-04 NOS
BOLT(FH-09)M6X38
QTY-10 NOS
STUD M6 & LOCKNUT (FH-04)
QTY-02 NOS
NUT (FH-10) M6
QTY-04 NOS
SCREW DRIVER (FH-07)
QTY-01 NOS
SELF THREADING SCREW & WASHER M4(FH-08)
QTY-17 NOS
METAL FRAME 1
QTY-02 NOS
METAL FRAME 2
QTY-01 NOS
PLY 1(470X185X18MM)
QTY-03 NOS
PLY 2(470X115X18MM)
QTY-01 NOS
PLY 3(1200X520X18MM)
QTY-01 NOS
SQUARE TUBE 1(25X470MM)
QTY-02 NOS
SQUARE TUBE 2(25X900MM)
QTY-01 NOS
CROSS STRIP
QTY-02 NOS
Place two metal frame 1.
(Make sure that hole
orientation should be
same)
Assemble three ply 1 at
Position by Aligning Holes
to frame as shown
(use Self Threading Screw
(FH-08)-12 Nos.)
Assemble ply 2 at Position
by Aligning Holes to frame
as shown
(use Self Threading Screw
(FH-08)-04 Nos.)
Step 1 :
Step 2 :
Step 3 :
Assemble two Sq. tube 1 at Position by
Aligning Holes to frame as shown.
(use- M6X38 Nut-bolt(FH-09)-04 Nos)
Assemble Sq. tube 2 at Position by
Aligning Holes to Sq. tube 1 as shown.
(use- M6X38 Nut-bolt(FH-09)-01 Nos)
Step 4 :
Step 5 :