19
SMARTair. SMARTair mobile.
A 8 Operation
A 8.1 Automatic operation
Recommended for normal usage.
Press mains switch
1
to position “on“
Press key
8
, LED “automatic“
2
illuminates. In this situation, SMARTair ,
or SMARTair mobile, is automatically
switched on or off together with the
connected ancillary unit.
Switch on the ancillary unit. SMARTair ,
or mobile, also starts automatically.
After switching off the ancillary unit, the
connected suction unit continues to run for
a few seconds and then switches itself off.
see also A 8.5 Fine-tuning for
automatic operation.
A 8.2 Manual operation
When using ancillary units without
electrical connection (e.g. EWL turbine
systems)
Press mains switch
1
to position “on“
Press key
8
, LED “continuous operation“
3
illuminates.
Switch on and off using the mains switch
1
, or change over
8
to “automatic“.
SMARTair or SMARTair mobile
must only be operated with a filter
bag in place.
A 8.3 Operation by footswitch
A footswitch can be connected to the
socket for the control cable
9
.
In the “automatic“ position
8
, the suction
unit can be operated by the footswitch.
SMAR
Tair
mo
bile
SMAR
Tair
4
3
5
2
8
7 6
1
1
5
