8 3D patient exposure
8.1 Preparing X-ray system
8.1.1 Attaching and removing sensor
CAUTION
Do not drop the sensor. KaVo limited warranty does not cover damage which
is due to misuse, e.g. dropping the sensor, neglect, or any cause other than
ordinary use.
If you have any reason to believe that the sensor might be faulty, take a test
exposure before taking a patient exposure.
NOTE
The available sensors are shown in section "Sensor" on page 12.
8.1.1.1 Attaching sensor to C-arm
Steps
1. Push the sensor onto the connector on the C-arm.
8 3D patient exposure
Instructions for use
KaVo ProXam 25
