KaVo PHYSIO Evo, Instructions For Use Manual

Page: 11 / 40

Instructions for use PHYSIO Evo/Evo F/One
3 Description of the product | 3.2 Dentist chair PHYSIO Evo/Evo F/One
11 / 40
3.2 Dentist chair PHYSIO Evo/Evo F/One
KaVo PHYSIO Evo/Evo F/One
The dentist chair PHYSIO Evo/Evo F/One delivered from the factory with soft
castors
Mat. no. 1.010.3896 for hard flooring. The running surface and hous-
ing of the castors are bi-chrome.
Hard castors for soft flooring, e.g. fitted carpet are available as an assembly kit
Mat. no. 1.010.3827 . The running surface and housing of the castors are
monochrome.
Castors with locking brake (set of 3 castors with locking brake and 2 without)
are available as assembly kit
Mat. no. 1.015.2671 for 3D imaging patient po-
sitioning.
NOTE
Use the castors that are appropriate for the flooring.
Only use soft castors for hard flooring. Only use hard castors for soft flooring.
Alternatively, castors with locking brake are available for the 3D imaging pa-
tient positioning.
NOTE
With the use of the castors with locking brake, this is a visitor's in accordance
with DIN EN 16139, test level 1 and is not the typical case of a dentist chair.