KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Installation Manual

Page: 10 / 168

2
3D Medium panel, H x W (optional)
• 50 x 50 mm Field of View
• 61 x 78 mm Field of View
• 78 x 78 mm Field of View
• 78 x 150 mm Field of View
• 130 x 150 mm Field of View (optional)
NOTICE! The FOV heights are maximum values measured
at the center of the FOV, the measured heights at the
edges of the FOV are smaller.
1.2 Intended use
The unit is intended for dental radiographic examination of
teeth, jaw and TMJ areas by producing conventional 2D x-
ray images as well as x-ray projection images of an
examined volume for the reconstruction of a 3D view.
The unit is also intended for carpus imaging in assisting
cephalometric analyses (Not in USA).
CAUTION! USA only: Federal law restricts this device to
sale by or on the order of a dentist or other qualified
professional.
1.3 Associated documentation
• OP 3D Pro User manual
• OP 3D Pro
Service
manual
• CLINIVIEW software user manual
• CLINIVIEW software installation manual
• The user manual supplied with the 3D imaging
software
• The installation manual supplied with the 3D
imaging software
1.4 References
The following instructions are delivered with in the
OP 3D Pro installation manual:
• Firmware update instructions