9.5
What should be done if there is damage from transportation?
▶ Do not touch the goods and packaging; do not use the goods.
▶ Report the damage to the shipping company.
▶ Within four days, contact the shipping department at KaVo. Tel.: 0 73 51 / 56 –
0
▶ Damaged goods cannot be returned before talking with KaVo.
Note
KaVo will need the freight bill with a confirmation of damage to process the damage.
9.6
Setup plan
The setup plan provides information on:
▪ Required space
▪ Treatment position
See also: Setup plan
9.7
Installing the door switch
Note
Door switches do not necessarily have to be installed.
Note
An electrician must assemble and install the door switch. A technician trained by
KaVo must connect the KEY Laser 3+ / III upgraded.
The KaVo KEY Laser is equipped with a door switch connection at the rear.
See also: 3.1.2 Rear of the laser device, Page 22
An opener can be connected.
This means that if the access door to the KEY Laser 3+ / III upgraded treatment
room is open, the door switch must also be opened.
If several access doors exist, they must all be equipped with a door switch.
The door switches must be switched sequentially.
The maximum load for the swtiches is 5 V /10 mA.
Note
Do not connect any external voltage to the "Door switch" connections!
If door switches are not provided, connect the connection with the provided jumper.
If the door switch connection is interrupted, you cannot switch from standby to ready
mode.
A reference appears on the display: "Door open – Close the door contact"
Instructions for use KEY Laser 3+ 1343 KEY Laser III 1243 upgraded
9 Assembly instructions | 9.5 What should be done if there is damage from transportation?
75/76
