4
First use
Requirement
The handpiece must only be operated and stored with the tool or test probe
chucked.
Note
Opening the chuck will lock the handpiece; in the event of unintentional opera‐
tion, the control will switch to error mode.
The combination of the control unit and handpiece must be approved by KaVo.
Note
When it is new, you can hear a soft, irregular clicking or buzzing at high speeds
of the micromotor. This bearing noise is completely normal, and disappears as
soon as the lubricant is evenly distributed.
The handpiece can be used on the
▪ K-Control
– Knee control 4960
– Table-top control 4965
– Foot control 4970
▪ K-Control, TLC
– Knee control 4955
– Foot control 4956
– Table-top control 4957
Instructions for use K-POWERgrip Handstück 4941
4 First use
14/29
