KaVo ESTETICA E70 Vision, Instructions For Use Manual

Page: 173 / 178

Instructions for use ESTETICA E70 Vision / E80 Vision
10 Information concerning the electromagnetic compatibility according to EN IEC 60601-1-2 | 10.1 Electromagnetic
Transmissions
10 Information concerning the electromagnetic
compatibility according to EN IEC 60601-1-2
10.1 Electromagnetic Transmissions
This product is designed for use in an environment like the one cited below. The
customer or the user should ensure that the device is used in an environment
of the specified type.
Measurements of emitted in-
terference Conformance Electromagnetic environment
-
Guidelines
HF emissions according to CISPR
11 Group 1 This device uses HF energy for its
internal functions exclusively.
Therefore, the HF emission of the
device is very low and interfer-
ence with adjacent electronic
devices is unlikely.
HF emissions according to CISPR
11 Class B This product is suitable for use in
all facilities including residential
ones, and facilities that are dir-
ectly connected to a public power
supply that also supplies residen-
tial buildings.
Emission of harmonics according
to IEC 61000-3-2 Class A This product is suitable for use in
all facilities including residential
ones, and facilities that are dir-
ectly connected to a public power
supply that also supplies residen-
tial buildings.
Emission of voltage fluctuations/
flicker according to IEC
61000-3-3 Conforms This product is suitable for use in
all facilities including residential
ones, and facilities that are dir-
ectly connected to a public power
supply that also supplies residen-
tial buildings.
10.2 Resistance to electromagnetic interference
This product is designed for use in an environment like the one cited below. The
customer or the user should ensure that the device is used in an environment
of the specified type.
Interference im-
munity tests IEC 60601 test levels Compliance level Electromagnetic en-
vironment -
Guidelines
Electrostatic discharge
(ESD) according to IEC
61000-4-2 ± 6 kV contact discharge
± 8 kV atmospheric dis-
charge ± 2/4/6 kV contact dis-
charge
± 2/4/8 kV atmospheric
discharge Floors should be made of
wood or concrete or be
fitted with ceramic tiles.
If the floor is fitted with
synthetic material, the
relative humidity must
be at least 30 %.
173 / 178