14
ELECTROtorque 4890/K200.
A 5 Installation and Connection
A 5.1 Installation
The following are authorized to
repair and service the KaVo
ELECTROtorque
:
• the engineers of KaVo agents through-
out the world
• the engineers of authorised KaVo dealers
who have been specially trained by KaVo
• independent engineers specially trained
by KaVo.
Location at the dentist unit:
Place the ELECTROtorque 4890 in the
intended location (see also A 4.1).
Remove previously used turbine or
pneumatic motor from tube and connect
turbine tube or pneumatic motor tube
connection
4
to four-hole connector
3
at
the back of the ELECTROtorque 4890.
Location at transformer:
Connect the ELECTROtorque 4890 to the
intended transformer
5
via screw
connection
2
.
Factory settings for the transformer is
230 V.
A 5.2 Voltage adaptation to
Transformer 1.001.8749
By removing the fuse holder
7
out of the letting modul
8
,the bridge
6
can be removed.
Replace the bridge that way, that the
relected voltage (115 or 230 V) can be
read.
Finally please replase the fuse holder
7
into the setting modul
8
.
ELECTROtorque
x1
00
0 rp
m
rev
erse
1
1
5
1
1
5
1
2
3
5
4
7
6
8
Summary of Contents for ELECTROtorque 4890
Page 31: ...29 ELECTROtorque 4890 K200...
