manualshive.com logo in svg

Kaval LNKFIB-H01, User Manual

Share
Download
Kaval LNKFIB-H01 User Manual Download Page 13

 

SatelLink

  

z

  USER MANUAL 

DCM000000052

 

 

Printed:  03.06.19,16:02 

 

Revision Date:6/19/03 

 13

 

 
 

 

 

Normal Operation 

 

The 

LSU Head-End Module

 has one LED on the faceplate: 

1.  OPERATING - Normally this LED will be GREEN. 

The 

LSU Remote Module

 has three LED’s on the faceplate: 

1.  OPERATING - Normally this LED will be GREEN. 

2.  FAULT – Red LED, If the internal diagnostics for the module detect a 

problem, then this LED will remain on 

3.  LASERS ON - This LED will be GREEN when any one of the three Lasers 

are operating. 

 

Configuration 

It is possible to re-configure the 

LNKFIB-R01 Remote Module

 in the field, either 

with a 

Personal Computer (PC)

 or via the optional 

LinkNet Control Module

. To 

use a 

PC

 it is necessary to connect the DB9 RS-232 connector on the Module to a 

standard DB9 RS232 Connector on the PC. On the PC a terminal emulation 
program such as 

HyperTerminal

 is used to communicate to the LinkNet Module. 

The settings are 9600 baud, 8 bits, no parity, and 1 stop bit. Commands are one or 
two words followed by pressing 

Return

. Commands may be given in upper or lower-

case. Available commands are... 

ACCESS USER

: 

Required as a simple password to gain access to customer 
settable parameters and diagnostics; This will time-out after 10 
minutes, and may have to be re-typed.

 

HELP or  ?

: 

Displays a list of Available Commands. 

LIST

: 

Displays Current Settings and Status Faults, Etc. 

VER

: 

Display the current Version of Software. 

ENABLE 1 or 0

: 

Enables or Disables the Module. 

GAINPCS ###:

 

Displays or Sets the PCS Transmit Gain (in tenths of a dB). 

GAINCELL ###:

 

Displays or Sets the Cellular Transmit Gain (in tenths of a dB). 

GAINPAGE ###:

 

Displays or Sets the iDEN and Paging Transmit Gain (in tenths of 
a dB). 

 

Please consult Kaval Wireless Technologies for further support.

Operation 

 

Summary of Contents for LNKFIB-H01
















Reviews:

No comments

Brands by name

Popular brands

Load more brands