BDA1250
Equipment Manual
DCM000000013
Kaval Telecom Inc Page 13 of 17
Figure 3-2. RF and DC Connections
4.4
Connecting the Power Cables
BDA1250 comes with AC adapter. Therefore an AC outlet providing 120 AC should be
available with 4ft of the BDA1250.
If AC outlet is to be installed, it is highly recommended
that AC Power Wiring be performed by a qualified Electrician so as to ensure compliance
with all National and Local Electrical Wiring Regulations. Connecting power cables can be
done as follow:
1.
Locate the on/off switch on the front of the BDA1250. Turn the switch to the OFF
position.
2.
Locate a nearby AC outlet and connect AC adapter to the AC outlet.
3.
Connect the DC input jack of the AC adapter to the BDA12500.
4.
Make sure the adapter cable is neatly tugged away.
5.
Turn the BDA1250 power switch to the ON position. LED should be luminous to
indicate the present of power.
To Outdoor
Antenna
Power Switch
LED
DC Port
To Indoor
Antenna
