Grouping of several lights
:
You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights to
different zones. This way you are completely flexible in creating different group combinations. Below
you can see some group examples.
Attention:
1. Please check whether the input voltage of the constant voltage power supply is in accordance with the
controller, and please check the connection of both the cathode and anode, otherwise the controller
will be broken.
2. Please don’t connect wires with power on. Please switch on again only when it is in right connection and
no short circuit.
3. Please keep your finger off the touch ring when installing the batteries to improve sensitivity and use
the remote (3 seconds later) after the batteries are installed. Please reinstall the batteries if the
touch ring is found low sensitivity.
4. Please do not use the controller in the place with wide range metal area or strong electromagnetic
wave nearby, the remote distance will be seriously affected.
