4
Features
• Balances Most Automotive Wheels
• Vertical Wheel Mounting
• Back Cone and Front Cone Mounting
• Easy-to-Read LEDs and Displays
• Automatic Calibration
• Removable Shaft Stud(Adapter)
• Dynamic, Static, and Alloy Operating Modes
Standard Accessories
• 4 Back Cones
• 100g Weight
• Back Cone Spring
• Quick Nut
• Rim Width Calipers
• Wheel Weight Hammer
• Balance Bowel
Before You Begin
Receiving
The shipment should be thoroughly inspected
as soon as it is received. The signed bill of
lading is acknowledgement, by the carrier, of
receipt in good condition of the shipment
covered by our invoice.
If any of the goods called for on this bill of
lading are shorted or damaged, do not accept
them until the carrier makes a notation of the
shorted or damaged goods on the freight bill.
Do this for your own protection.
NOTIFY THE CARRIER AT ONCE if any
hidden loss or damage is discovered after
receipt and request him to make an inspection.
.
Specifications
• Cycle time
8 seconds (avg.)
• Tire/Wheel Weight
65 kgs max.
• Wheel Diameter
25.4 inches max.
Rim Diameter
12 to 24 inches
• Rim Width
1.5 to 12 inches
Power supply
100V 50/60HZ
Working noise
＜
70dB
• Shipping Weight 165 kgs
Electrical Requirements
The balancer requires a 100 VAC, 50/60Hz,
single phase power supply and properly
grounded three-pin safety outlet.
