1
Kato Digitrax DCC Decoder.
29-351 Decoder For Control Car With Motor.
Please read this instruction sheet carefully prior to the use.
How to install the Decoder
1.
Please slide the under-cover over chassis in direction of the arrow and take it off.
2.
Please insert such a tool as flat headed screwdriver between car body and truck and
remove the truck.
3.
Please insert carefully the decoder in the direction indicated in the picture.
4.
Please make sure that the decoder is inserted firmly to the very end.
5.
Please fit the truck to the original position and put the under-cover on again before
running the car. When the under-cover is not put over, the power might not come
to the decoder, causing the non function of the decoder.
Rating and function of EM13 decoder for Motor Car
Default (initial) address value: 03 (Range it can be changed in: 01-9983)
Maximum Current: 1.0A (Peak Current Value: 1.5A)
Function Circuits: No (Only with circuit for Motor)
Complete with BEMF (Run with stable speed using Back Electric Magnetic Field),
Reset (Initialization), Transponding (Detection of position of the motor car)
The decoder can be customized in the function by changing the following program
values.
Program items and their values
CV
Default value
Function
Value range or Value Setting Example
CV01 03
2
digit
address
01
～
127
CV02 00
Start
Voltage
00
～
255 (Voltage 0
～
100%)
CV03 00
Acceleration
rate
00
～
31 (Rapid
～
Slow Change)
CV04 00
Slowdown
rate
00
～
31 (Rapid
～
Slow Change)
