Kato Imer CARRY 107, Operating Instructions Manual

Page: 11 / 54

1 SAFETY
MINIDUMPER
CARRY 107
2
9.
MAINTAIN GOOD VENTILATION
Do not use the machine for indoor works. Take all precautions to vent exhaust gas externally before starting
the engine if working in a hole in the ground, tunnel or trench. In such a place, the air trends to stagnate.
Breathing exhaust gas is very dangerous. Note that exhaust gases are fatally poisonous.
10. LIGHTING
The machine is designed to work in building jobsites and it does not have own lighting. It must be used in
enough illuminated places.
1.2 USE OF THE MACHINE
1. EXECUTE EACH MANOEUVRE, WITH RESPECT OF SAFETY
Execute all manoeuvres carefully. Operating brusquely the machine this can cause damages and reduce
consistently efficiency. Take care of regulations that warrant safety on job site. Leave after a sufficient safety
distance between machine and obstacle. Leading the machine on foot raise the platform assuring the hook.
2. DO NOT OVERLOAD
Never overload any cylinder enough to trigger the opening of the safety valve. This would cause an
excessive rise in the oil temperature, lowering the useful life of the hydraulic components.
3. SECURE FOOTING FOR SAFE OPERATION
Check that the machine footing is level and firm to avoid skidding or overturning if you need to use the
machine on the shoulder of a road or a slope.
4. MACHINE OPERATING LIMITS
The machine should be operated on a flat surface, but if you are moving material on sloping ground, be sure
that the tracks are positioned in the direction of the slope and not crossways. If you need to work on soft,
rough or unlevelled ground, take care to avoid overturning.
5. TIPPING
Be careful, during the reversal of accessory the center of gravity of the machine can moves, so the operation
must be done on a stable and not yielding surface.