7
KB Glow® Assembly Instructions
Upon receiving the KB Glow® remove all the pieces carefully from the box and check that all
components are present as per page 4 and 5.
Step 1.
With the hooks facing downwards, insert side panel (A1) with the semi-circle cutout (for
the LED cable) into the right-hand slots of back panel (B). Make sure that the semi-circle cutout is
at the top back.
Side Panel (A1)
Back Panel (B)
Step 2.
Insert side panel (A2) into the left-hand slots of back panel (B) without the logo.
Step 3.
Insert top panel (C) into the top slots of back panel B. The LED’s should be on the
underside and the square camera openings towards the front.
Top Panel (C)
Step 4.
While holding top panel (C) in place, align front panel (B) with the logo and insert all tabs
into slots.
Front Panel (B)
