7
Speed, time,
distance or
calorie
modeÑTo
select one of
these modes
for continuous
display, press
the mode but-
ton repeatedly.
The mode indicators will show which mode is
selected. Make sure that the scan mode is not
selected.
3. To reset the display, press the on/reset button.
4. To turn off the power, simply wait for about four min-
utes.
Note: The monitor has an Òauto-offÓ fea-
ture. If the pedals are not moved and the moni-
tor buttons are not pressed for four minutes,
the power will turn off automatically in order to
conserve the batteries.
Inspect and tighten all parts of the exercise cycle
regularly. Replace any worn parts immediately.
The exercise cycle can be cleaned with a soft, damp
cloth. Avoid spilling liquid on the console. Keep the
console out of direct sunlight or the display may be
damaged. Remove the batteries when storing the
exercise cycle.
HOW TO STORE THE EXERCISE CYCLE
When the exercise
cycle is not in use,
it can be folded for
compact storage.
Remove the Spring
Clip (55) and pull
out the ÒLÓ Pin
(54). Fold the exer-
cise cycle by bring-
ing the seat and
handlebars toward
one another. Store
the exercise cycle
indoors, away from
moisture and dust.
BATTERY REPLACEMENT
If the console does not function properly, the batteries
should be replaced. See assembly step 5 on page 5.
In addition, make sure that the console wire is con-
nected to the reed switch wire.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. In order to adjust the
reed switch, the Left Side Shield (10) must be remov-
ed. Using an adjustable wrench, turn the Left Pedal
(8) clockwise and remove it from the Crank (22).
Remove the three Side Shield Screws (40) and the
two M4 x 16mm Screws (46) from the Left Side
Shield. Make sure that the arm of the Crank is in the
position shown in the drawing above. Carefully slide
the Left Side Shield forward off the arm of the Crank
and remove it.
STORAGE AND TROUBLE-SHOOTING
54
55
10
22
40
46
8
40
