2. step
Fold up the braded braiding over the sheath. With ‚Quad Shield‘,
‚Tri Shield‘ and ‚Super Shield‘ cables only remove the outer fi lm
and braiding. The inner braiding must be folded up over the
sheath. Make sure that the fi lm abuts against the dielectric and
is intact.
3. step (for EMK 12)
Turn the plug around and pull its front-side over the fi lm. Now
move it slightly to smooth out the fi lm, and press it tightly onto
the dielectric, observing the direction in which it overlaps.
4. step
4.1 For EMK 12
Press the plug with the inner crimp-ferrule between fi lm and brai-
ding until the dielectric is fl ush with the contact surface of the
plug.
4.2 For EMK 19
Press the plug with the inner crimp-ferrule between fi lm and
braiding. Press the plug against the cable until the fl exible pin
protrudes from the plug, as shown here. So a safe contact of the
inner conductor is ensured.
5. step
Use ZAW 13 compression pliers (order no. 21410012) to grout the
plug.
Adaptor C must be inserted.
www.kathrein-ds.com | [email protected]
9362988/b/STM/0320/GB | Subject to change.
KATHREIN Digital Systems GmbH | Anton-Kathrein-Str. 1–3 | 83022 Rosenheim | Germany | Phone +49 731 270 909 70