936.4382/b/VKDT/0713/DE/EN - Technische Änderungen vorbehalten! Technical data subject to change
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 • P.O. Box 10 04 44 • 83004 Rosenheim • GERMANY • Phone ++49 8031 184-0 • Fax +49 8031 184-306
Note on use of the UFS 946/CI+ on a BAS 60 planar antenna with the HDZ 60
inclinometer - Setting positioning on the UFS 946/CI+
Calling up menu Antenna Confi guration
•
Select a programme from the desired satellite before aligning the antenna
• Press
the
(green) button
•
Select the menu “Tuner Confi guration” (
) and press the
button
Positioning
•
Select the “Position determination” line (
)
•
Select the type of positioning (
), either “via
GPS” or “List selection” and press the
button
Depending on your choice, the following screen will appear (example):
•
Settings are made using the cursors (
) or the numerical keys
• Confi orm your selection by pressing the
button
You must select “BAS 60 inkl. HDZ 60” in the “Tuner 1” line!
Use the
buttons to do so.
•
If you select “via GPS” you can enter the GPS coor-
dinates of your location.
• If you select “List selection” fi rst select the country
and then your city from a pre-saved list.
“via GPS”
“List selection”
If necessary, re-align the antenna. Set the elevation to a value at which the blue tick appears (see image above). Set the azimuth to a
value where you get maximum signal strength and quality. When performing, setting, please observe the documentation provided with
your antenna. Press the
button to exit the menu. Your settings will be saved.
Actual value = Current elevation of the planar antenna
Target value = Target elevation value of the planar antenna
Actual and target values match = blue tick (see image on the
right).
Actual and target values
do not
match = red
arrow (see small image).
Setting the elevation
